Matching Items (59)
Filtering by
- Member of: Theses and Dissertations
- Member of: Center for Negative Carbon Emissions Collection
Description
This honors thesis covers an overview of the the motivation, objectives, and projects of the Xie Research Group, focusing on the mechanical effect of dopants (through p-doping) on the structural domains of conjugated polymers (specifically P3DT). The ability to sustainably 3D-print conjugated polymers has the potential to impact a variety of industries (personalized technology, medical treatment, replacement of metals, etc).
ContributorsMillman, Jeremy (Author) / Xie, Renxaun (Thesis director) / Green, Matthew (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor)
Created2022-05
Description
This thesis analyzed Canon GPR-30 Black Standard Yield Toner in hopes to gain better understanding of the additives and plastic used in a popular photocopier toner formulation. By analyzing the toner’s composition from the perspective of its recyclability and potential to be manufactured using recycled plastic, this thesis hoped to fill a gap in current literature regarding how toner fits into a circular economy. While the analysis of the selected toner was ultimately inconclusive, three hypotheses about the toner’s composition are put forth based upon data from differential scanning calorimetry (DSC), solubility analysis, and Fourier Transform Infrared (FTIR) spectroscopy experimentation. It is hypothesized that the toner is most likely composed of either polymethyl methacrylate (PMMA) or polyethylene terephthalate (PET). Both of these polymers have characteristic FTIR peaks that were exhibited in the toner spectra and both polymers exhibit similar solubility behavior to toner samples. However, the glass transition temperature and melting temperature of the toner sampled were 58℃ and 74.5℃ respectively, both of which are much lower than that of PMMA and PET. Thus, a third hypothesis that would better support DSC findings is that the toner is primarily composed of nylon 6,6. While DSC data best matches this polymer, FTIR data seems to rule out nylon 6,6 as an option because its characteristic peaks were not found in experimental data. Thus, the Canon GPR-30 Black Standard Yield Toner is probably made from either PMMA or PET. Both PMMA and PET are 100% recyclable plastics which are commonly repurposed at recycling facilities, however, unknowns regarding toner additives make it difficult to determine how this toner would be recycled. If the printing industry hopes to move towards a circular economy in which plastic can be recycled to use towards toner manufacturing and toner can be “unprinted” from paper to be recycled into new toner, it is likely that monetary incentives or government regulations will need to be introduced to promote the sharing of toner formulations for recycling purposes.
ContributorsChase, Jasmine (Author) / Green, Matthew (Thesis director) / Emady, Heather (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2023-05
Description
We utilized biomaterial scaffolds created from an electrospinning apparatus to create fibrous scaffolds with controllable morphology. To create consistent stable fibers, norbornene-modified cellulose acetate (nor-CA) was used as the polymer in solvent solutions of trifluoroacetic acid (TFA) and acetone/N,N-dimethylacetamide (DMAc). Solution rheology was used to determine a baseline for the nor-CA concentration used within each solvent system for electrospinning. The fibrous scaffolds were analyzed for morphology and fiber size using scanning electron microscopy. Increased fiber stability and decreased beading was found with higher concentrations of nor-CA for each solvent system. TFA appeared to be the most versatile as it was able to form fibers without beads at concentrations of 15%, 18%, and 21% nor-CA, with the most stable and uniform fibers at 21% nor-CA. This solvent had a conductivity measurement of 0.98 mS. DMAc/acetone had a much higher conductivity measurement and increased beading at lower concentrations of nor-CA.
ContributorsNorris, Quintin (Author) / Holloway, Julianne (Thesis director) / Green, Matthew (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor)
Created2022-05
Description
Workshop report on socio-economic and technical discussions Direct Air Capture as a technology for the climate transition.
ContributorsArcusa, Stéphanie (Author) / Lackner, Klaus (Author) / Page, Robert (Author) / Sriramprasad, Vishrudh (Author) / Brandt, William (Author) / Moore, Jacob (Author) / Green, Matthew (Author) / Patil, Sourabh (Hanmanthrao) (Author) / Center for Negative Carbon Emissions (Contributor) / Julie Ann Wrigley Global Futures Laboratory (Contributor)
Created2022-01-19
Targeting Tumors: Inclusion of Functional Groups on Ion-Containing Block Copolymers to Combat Cancer
Description
This research attempts to determine the most effective method of synthesizing a peptide such that it can be utilized as a targeting moiety for polymeric micelles. Two melanoma-associated peptides with high in vitro and in vivo binding affinity for TNF receptors have been identified and synthesized. Matrix Assisted Laser Desorption/Ionization-Time of Flight Mass Spectrometry (MALDI-ToF) was used to help verify the structure of both peptides, which were purified using Reversed-Phase High Performance Liquid Chromatography (RP-HPLC). The next steps in the research are to attach the peptides to a micelle and determine their impact on micelle stability.
ContributorsMoe, Anna Marguerite (Author) / Green, Matthew (Thesis director) / Jones, Anne (Committee member) / Sullivan, Millicent (Committee member) / Chemical Engineering Program (Contributor) / School of International Letters and Cultures (Contributor) / Sandra Day O'Connor College of Law (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Gene delivery is a broadly applicable tool that has applications in gene therapy, production of therapeutic proteins, and as a study tool to understand biological pathways. However, for successful gene delivery, the gene and its carrier must bypass or traverse a number of formidable obstacles before successfully entering the cell’s nucleus where the host cell’s machinery can be utilized to express a protein encoded by the gene of interest. The vast majority of work in the gene delivery field focuses on overcoming these barriers by creative synthesis of nanoparticle delivery vehicles or conjugation of targeting moieties to the nucleic acid or delivery vehicle, but little work focuses on modifying the target cell’s behavior to make it more amenable to transfection.
In this work, a number of kinase enzymes have been identified by inhibition to be targets for enhancing polymer-mediated transgene expression (chapter 2), including the lead target which appears to affect intracellular trafficking of delivered nucleic acid cargo. The subsequent sections (chapters 3 and 4) of this work focus on targeting epigenetic modifying enzymes to enhance polymer-mediated transgene expression, and a number of candidate enzymes have been identified. Some mechanistic evaluation of these targets have been carried out and discussion of ongoing experiments and future directions to better understand the mechanistic descriptions behind the phenomena are discussed. The overall goal is to enhance non-viral (polymer-mediated) transgene expression by modulating cellular behavior for general gene delivery applications.
In this work, a number of kinase enzymes have been identified by inhibition to be targets for enhancing polymer-mediated transgene expression (chapter 2), including the lead target which appears to affect intracellular trafficking of delivered nucleic acid cargo. The subsequent sections (chapters 3 and 4) of this work focus on targeting epigenetic modifying enzymes to enhance polymer-mediated transgene expression, and a number of candidate enzymes have been identified. Some mechanistic evaluation of these targets have been carried out and discussion of ongoing experiments and future directions to better understand the mechanistic descriptions behind the phenomena are discussed. The overall goal is to enhance non-viral (polymer-mediated) transgene expression by modulating cellular behavior for general gene delivery applications.
ContributorsChristensen, Matthew David (Author) / Rege, Kaushal (Thesis advisor) / Nielsen, David (Committee member) / Green, Matthew (Committee member) / Haynes, Karmella (Committee member) / Muthuswamy, Jitendran (Committee member) / Arizona State University (Publisher)
Created2016
Description
Lithium-ion and lithium-metal batteries are deemed to be the choice of energy storage media for the future. However, they are not entirely safe and their performance in terms of cycle life and charging rates is sub-optimal. A majority of these issues arise from the currently used flammable polyolefinic separators and carbonate solvent based electrolytes. This work utilizes in-house developed and specific property tuned electrode-coated inorganic separators in combination with a fire-proof electrolyte to resolve the above stated concerns.Firstly, to improve the safety of the lithium-ion cell with a commercial polypropylene separator a thermally stable in-house developed electrode coated quartz silica separator is utilized. The silica separator due to its better electrolyte wettability, electrolyte uptake and lower resistance also offers better capacity retention (~ 15 %) at high rates of discharge. Subsequently, research on developing a completely safe lithium-ion battery was conducted by replacing the traditional carbonate solvent based electrolyte with a fire-proof lithium bis-fluoro sulphonyl-imide salt/tri-methyl phosphate solvent electrolyte. However, this electrolyte has a high viscosity and low separator wetting rate.
A microporous in house synthesized silicalite electrode-coated separator due to its high surface energy functionalizes the viscous fire-proof electrolyte and together they are tested in a full-cell. The intra-particle pores of the silicalite separator result in a thinner and more robust solid electrolyte interface on graphite. This results in about 20 % higher capacity retention during long term cycling when compared to the polypropylene separator used in the same full-cell.
To enable stable and fast charging lithium-metal batteries free from dendrite propagation related failure, plate shaped γ-alumina and silicalite electrode-coated separators with high tortuosity are developed and used in a lithium-metal full-cell battery, with the former separator having no intra-particle pores and the latter having them. The γ-alumina separators show improvements in dendrite propagation prevention up to 3 C-rate of charge/discharge but a loss in active lithium is seen beyond the 75th cycle. However, microporous plate-shaped silicalite separators did not show any loss in active lithium even at 3 C-rate for 100 cycles due to the homogenized lithium-ion flux at the anode, while also preventing dendrite propagation.
ContributorsRafiz, Kishen (Author) / Lin, Jerry Y.S (Thesis advisor) / Muhich, Christopher (Committee member) / Kannan, Arunachala (Committee member) / Deng, Shuguang (Committee member) / Green, Matthew (Committee member) / Arizona State University (Publisher)
Created2021
Description
Deformable heat exchangers could provide a multitude of previously untapped advantages ranging from adaptable performance via macroscale, dynamic shape change (akin to dilation/constriction seen in blood vessels) to enhanced heat transfer at thermal interfaces through microscale, surface deformations. So far, making deformable, ‘soft heat exchangers’ (SHXs) has been limited by the low thermal conductivity of materials with suitable mechanical properties. The recent introduction of liquid-metal embedded elastomers by Bartlett et al1 has addressed this need. Specifically, by remaining soft and stretchable despite the addition of filler, these thermally conductive composites provide an ideal material for the new class of “soft thermal systems”, which is introduced in this work. Understanding such thermal systems will be a key element in enabling technology that require high levels of stretchability, such as thermoregulatory garments, soft electronics, wearable electronics, and high-powered robotics. Shape change inherent to SHX operation has the potential to violate many conventional assumptions used in HX design and thus requires the development of new theoretical approaches to predict performance. To create a basis for understanding these devices, this work highlights two sequential studies. First, the effects of transitioning to a surface deformable, SHX under steady state static conditions in the setting of a liquid cooling device for thermoregulation, electronics and robotics applications was explored. In this study, a thermomechanical model was built and validated to predict the thermal performance and a system wide analysis to optimize such devices was carried out. Second, from a more fundamental perspective, the effects of SHXs undergoing transient shape deformation during operation was explored. A phase shift phenomenon in cooling performance dependent on stretch rate, stretch extent and thermal diffusivity was discovered and explained. With the use of a time scale analysis, the extent of quasi-static assumption viability in modeling such systems was quantified and multiple shape modulation regime limits were defined. Finally, nuance considerations and future work of using liquid metal-silicone composites in SHXs were discussed.
ContributorsKotagama, Praveen (Author) / Rykaczewski, Konrad (Thesis advisor) / Wang, Robert (Committee member) / Phelan, Patrick (Committee member) / Herrmann, Marcus (Committee member) / Green, Matthew (Committee member) / Arizona State University (Publisher)
Created2020
Description
Membrane based technology is one of the principal methods currently in widespread use to address the global water shortage. Pervaporation desalination is a membrane technology for water purification currently under investigation as a method for processing reverse osmosis concentrates or for stand-alone applications. Concentration polarization is a potential problem in any membrane separation. In desalination concentration polarization can lead to reduced water flux, increased propensity for membrane scaling, and decreased quality of the product water. Quantifying concentration polarization is important because reducing concentration polarization requires increased capital and operating costs in the form of feed spacers and high feed flow velocities. The prevalent methods for quantifying concentration polarization are based on the steady state thin film boundary layer theory. Baker’s method, previously used for pervaporation volatile organic compound separations but not desalination, was successfully applied to data from five previously published pervaporation desalination studies. Further investigation suggests that Baker’s method may not have wide applicability in desalination. Instead, the limitations of the steady state assumption were exposed. Additionally, preliminary results of nanophotonic enhancement of pervaporation membranes were found to produce significant flux enhancement. A novel theory on the mitigation of concentration polarization by the photothermal effect was discussed.
ContributorsMann, Stewart, Ph.D (Author) / Lind, Mary Laura (Thesis advisor) / Walker, Shane (Committee member) / Green, Matthew (Committee member) / Forzani, Erica (Committee member) / Emady, Heather (Committee member) / Arizona State University (Publisher)
Created2019
Description
Tissues within the body enable proper function throughout an individual’s life. After severe injury or disease, many tissues do not fully heal without surgical intervention. The current surgical procedures aimed to repair tissues are not sufficient to fully restore functionality. To address these challenges, current research is seeking new tissue engineering approaches to promote tissue regeneration and functional recovery. Of particular interest, biomaterial scaffolds are designed to induce tissue regeneration by mimicking the biophysical and biochemical aspects of native tissue. While many scaffolds have been designed with homogenous properties, many tissues are heterogenous in nature. Thus, fabricating scaffolds that mimic these complex tissue properties is critical for inducing proper healing after injury. Within this dissertation, scaffolds were designed and fabricated to mimic the heterogenous properties of the following tissues: (1) the vocal fold, which is a complex 3D structure with spatially controlled mechanical properties; and (2) musculoskeletal tissue interfaces, which are fibrous tissues with highly organized gradients in structure and chemistry. A tri-layered hydrogel scaffold was fabricated through layer-by-layer stacking to mimic the mechanical structure of the vocal fold. Furthermore, magnetically-assisted electrospinning and thiol-norbornene photochemistry was used to fabricate fibrous scaffolds that mimic the structural and chemical organization of musculoskeletal interfacial tissues. The work presented in this dissertation further advances the tissue engineering field by using innovative techniques to design scaffolds that recapitulate the natural complexity of native tissues.
ContributorsTindell, Raymond Kevin (Author) / Holloway, Julianne (Thesis advisor) / Green, Matthew (Committee member) / Pizziconi, Vincent (Committee member) / Stephanopoulos, Nicholas (Committee member) / Acharya, Abhinav (Committee member) / Arizona State University (Publisher)
Created2021