The recent discoveries of 2D van der Waals (vdW) materials have led to the realization of 2D magnetic crystals. Previously debated and thought impossible, transition metal halides (TMH) have given rise to layer dependent magnetism. Using these TMH as a basis, an alloy composing of Fe1-xNixCl2 (where 0 ≤ x ≤ 1) was grown using chemical vapor transport. The intrigue for this alloy composition stems from the interest in spin canting and magnet moment behavior since NiCl2 has in-plane ferromagnetism whereas FeCl2 has out-of-plane ferromagnetism. While in its infancy, this project lays out a foundation to fully develop and characterize this TMH via cationic alloying. To study the magnetic properties of this alloy system, Vibrating Sample Magnetometry was employed extensively to measure the magnetism as a function of temperature as well as applied magnetic field. Future work with use a combination of X-Ray Diffraction, Raman, Scanning Electron Microscopy, and Energy-Dispersive X-Ray Spectroscopy Mapping to verify homogeneous alloying rather than phase separation. Additionally, ellipsometry will be used with Kramer-Kronig relations to extract the dielectric constant from Fe1-xNixCl2. This work lays the foundation for future, fruitful work to prepare this vdW cationic alloy for eventual device applications.
To mitigate climate change, carbon needs to be removed from the atmosphere and stored for thousands of years. Currently, carbon removal and storage are voluntarily procured, and longevity of storage is inconsistently defined and regulated. Clauses can be added to procurement contracts to require long-term management and increase the durability of storage. Well-designed and properly enforced contracts can pave the way to future regulation for long-term carbon management.
The environment today is facing concerns over accumulation of plastics in landfills as well as excessive CO2 emissions. Containers and packaging take up approximately 15 million tons each year, and accumulations such as the Great Pacific Garbage Patch are entering the oceans. Work has been done to alter and treat polyethylene plastic to be added to cement mixtures. This is done to increase bearing capacity and ductility of concrete in addition to decreasing carbon emissions and plastic waste.
Protein and gene circuit level synthetic bioengineering can require years to develop a single target. Phage assisted continuous evolution (PACE) is a powerful new tool for rapidly engineering new genes and proteins, but the method requires an automated cell culture system, making it inaccessible to non industrial research programs. Complex protein functions, like specific binding, require similarly dynamic PACE selection that can be alternatively induced or suppressed, with heat labile chemicals like tetracycline. Selection conditions must be controlled continuously over days, with adjustments made every few minutes. To make PACE experiments accessible to the broader community, we designed dedicated cell culture hardware and integrated optogenetically controlled plasmids. The low cost and open source platform allows a user to conduct PACE with continuous monitoring and precise control of evolution using light.
DNA is useful for electronic applications due to its self-assembly and electronic properties. It can be improved for this purpose through the addition of metal ions. In this experiment, DNA was modified with silver ions and carbon nanotubes were attached to both ends. The DNA-CNTs were connected over a 300 nm gap between gold electrodes using cysteamine. The conductance was found to be 1.28*10-4 G0, which is similar to literature values for unmodified DNA. Therefore, modifying DNA with silver ions was not found to significantly improve the conductance. It was also found that smaller applied voltages need to be used because of electrochemistry happening above 1 V.
Most asteroids originated in larger parent bodies that underwent accretion and heating during the first few million years of the solar system. We investigated the parent body of S-type asteroid 25143 Itokawa by developing a computational model which can approximate the thermal evolution of an early solar system body. We compared known constraints on Itokawa’s thermal history to simulations of its parent body and constrained its time of formation to between 1.6 and 2.5 million years after the beginning of the solar system, though certain details could allow for even earlier or later formation. These results stress the importance of precise data required of the material properties of asteroids and meteorites to place better constraints on the histories of their parent bodies. Additional mathematical and computational details are discussed, and the full code and data is made available online.
Sun Stop Solar, is a solar module development and manufacturing company that utilizes a unique class of materials, perovskites, as the solar cells’ absorption layer. Perovskites are a unique class of compounds with some perovskites being able to absorb photons and excite electrons to create current. Sun Stop Solar plans to initially begin by developing the foundational technological patent for our perovskite-based single-junction solar cells. Sun Stop Solar plans to initially begin by first having a patent set up, then licensing our patent to a manufacturer, and slowly building towards manufacturing our own solar modules.
The 1970’s was an exciting time for those interested in avian navigation and magnetoreception. In the mid 1970’s, it had been scientifically proven that birds utilized the Earth’s magnetic fields as a means for orientation. However, while scientists now knew that birds could detect geomagnetic fields, a major question still remained: how? Several years later, physicist Klaus Schulten would bring the world much closer to an answer with the introduction of the radical pair model. With an extremely firm grasp of quantum mechanics, Schulten was able to make an amazing connection between the magnetically sensitive “radical pairs” and magnetic sensing in organisms (such as birds). The goal of this thesis is to explore this intersection of quantum mechanics and biology first illuminated by Schulten, through providing an in-depth explanation of the radical pair model itself, the quantum mechanical concepts that allow it to exist, the possible biological structures involved, and a small exploration of where the theory stands today, all to better understand the fascinating phenomenon of avian magnetoreception.
Computational materials is a field that utilizes modeling, simulations, and technology to study how materials behave. This honors thesis is a presentation discussing computational materials, our study of packing theory using the Monte Carlo (MC), and how our research can be related to real materials we use.