Matching Items (23)
Description
It is the intent of this research to determine the feasibility of utilizing industrial byproducts in cementitious systems in lieu of Portland Cement to reduce global CO2 emissions. Class C and Class F Fly Ash (CFA and FFA, respectively) derived from industrial coal combustion were selected as the replacement materials for this study. Sodium sulfate and calcium oxide were used as activators. In Part 1 of this study, focus was placed on high volume replacement of OPC using sodium sulfate as the activator. Despite improvements in heat generation for both CFA and FFA systems in the presence of sulfate, sodium sulfate was found to have adverse effects on the compressive strength of CFA mortars. In the CFA mixes, strength improved significantly with sulfate addition, but began to decrease in strength around 14 days due to expansive ettringite formation. Conversely, the addition of sulfate led to improved strength for FFA mixes such that the 28 day strength was comparable to that of the CFA mixes with no observable strength loss. Maximum compressive strengths achieved for the high volume replacement mixes was around 40 MPa, which is considerably lower than the baseline OPC mix used for comparison. In Part 2 of the study, temperature dependency and calcium oxide addition were studied for sodium sulfate activated systems composed of 100% Class F fly ash. In the presence of sulfate, added calcium increased reactivity and compressive strength at early ages, particularly at elevated temperatures. It is believed that sulfate and calcium react with alumina from fly ash to form ettringite, while heat overcomes the activation energy barrier of fly ash. The greatest strengths were obtained for mixes containing the maximum allowed quantity of calcium oxide (5%) and sodium sulfate (3%), and were around 12 MPa. This is a very low compressive strength relative to OPC and would therefore be an inadequate substitute for OPC needs.
ContributorsTweedley, Shannon Elizabeth (Author) / Neithalath, Narayanan (Thesis director) / Mamlouk, Michael (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor) / School of Sustainable Engineering and the Built Environment (Contributor)
Created2014-05
Description
Microbial electrochemical cells (MXCs) serve as an alternative anaerobic technology to anaerobic digestion for efficient energy recovery from high-strength organic wastes such as primary sludge (PS). The overarching goal of my research was to address energy conversion from PS to useful resources (e.g. hydrogen or hydrogen peroxide) through bio- and electro-chemical anaerobic conversion processes in MXCs.
First, a new flat-pate microbial electrolysis cell (MEC) was designed with high surface area anodes using carbon fibers, but without creating a large distance between the anode and the cathode (<0.5 cm) to reduce Ohmic overpotential. Through the improved design, operation, and electrochemical characterization, the applied voltages were reduced from 1.1 to ~0.85 V, at 10 A m-2. Second, PS conversion was examined through hydrolysis, fermentation, methanogenesis, and/or anode respiration. Since pretreatment often is required to accelerate hydrolysis of organic solids, I evaluated pulsed electric field technology on PS showing a modest improvement of energy conversion through methanogenesis and fermentation, as compared to the conversion from waste activated sludge (WAS) or WAS+PS. Then, a two-stage system (prefermented PS-fed MEC) yielded successful performance in terms of Coulombic efficiency (95%), Coulombic recovery (CR, 80%), and COD-removal efficiency (85%). However, overall PS conversion to electrical current (or CR) through pre-fermentation and MEC, was just ~16%. Next, a single-stage system (direct PS-fed MEC) with semi-continuous operation showed 34% CR at a 9-day hydraulic retention time. The PS-fed MEC also showed an important pH dependency, in which high pH (> 8) in the anode chamber improved anode respiration along with methanogen inhibition. Finally, H2O2 was produced in a PS-fed microbial electrochemical cell with a low energy requirement (~0.87 kWh per kg H2O2). These research developments will provide groundbreaking knowledge for MXC design, commercial application, and anaerobic energy conversion from other high-strength organic wastes to resources.
First, a new flat-pate microbial electrolysis cell (MEC) was designed with high surface area anodes using carbon fibers, but without creating a large distance between the anode and the cathode (<0.5 cm) to reduce Ohmic overpotential. Through the improved design, operation, and electrochemical characterization, the applied voltages were reduced from 1.1 to ~0.85 V, at 10 A m-2. Second, PS conversion was examined through hydrolysis, fermentation, methanogenesis, and/or anode respiration. Since pretreatment often is required to accelerate hydrolysis of organic solids, I evaluated pulsed electric field technology on PS showing a modest improvement of energy conversion through methanogenesis and fermentation, as compared to the conversion from waste activated sludge (WAS) or WAS+PS. Then, a two-stage system (prefermented PS-fed MEC) yielded successful performance in terms of Coulombic efficiency (95%), Coulombic recovery (CR, 80%), and COD-removal efficiency (85%). However, overall PS conversion to electrical current (or CR) through pre-fermentation and MEC, was just ~16%. Next, a single-stage system (direct PS-fed MEC) with semi-continuous operation showed 34% CR at a 9-day hydraulic retention time. The PS-fed MEC also showed an important pH dependency, in which high pH (> 8) in the anode chamber improved anode respiration along with methanogen inhibition. Finally, H2O2 was produced in a PS-fed microbial electrochemical cell with a low energy requirement (~0.87 kWh per kg H2O2). These research developments will provide groundbreaking knowledge for MXC design, commercial application, and anaerobic energy conversion from other high-strength organic wastes to resources.
ContributorsKi, Dong Won (Author) / Torres, César I (Thesis advisor) / Rittmann, Bruce E. (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Parameswaran, Prathap (Committee member) / Popat, Sudeep C (Committee member) / Arizona State University (Publisher)
Created2016
Description
The microbial electrochemical cell (MXC) is a novel environmental-biotechnology platform for renewable energy production from waste streams. The two main goals of MXCs are recovery of renewable energy and production of clean water. Up to now, energy recovery, Coulombic efficiency (CE), and treatment efficiency of MXCs fed with real wastewater have been low. Therefore, the overarching goal of my research was to address the main causes for these low efficiencies; this knowledge will advance MXCs technology toward commercialization.
First, I found that fermentation, not anode respiration, was the rate-limiting step for achieving complete organics removal, along with high current densities and CE. The best performance was achieved by doing most of the fermentation in an independent reactor that preceded the MXC. I also outlined how the efficiency of fermentation inside MXCs can be enhanced in order to make MXCs-based technologies cost-competitive with other anaerobic environmental biotechnologies. I revealed that the carbohydrate and protein contents and the BOD5/COD ratio governed the efficiency of organic-matter fermentation: high protein content and low BOD5/COD ratio were the main causes for low fermentation efficiency.
Next, I showed how a high ammonium concentration can provide kinetic and metabolic advantages or disadvantages for anode-respiring bacteria (ARB) over their competitors, particularly methanogens. When exposed to a relatively high ammonium concentration (i.e., > 2.2 g total ammonia-nitrogen (TAN)/L), the ARB were forced to divert a greater electron flow toward current generation and, consequently, had lower net biomass yield. However, the ARB were relatively more resistant to high free ammonia-nitrogen (FAN) concentrations, up to 200 mg FAN/L. I used FAN to manage ecological interactions among ARB and non-ARB in an MXC fed with fermentable substrate (glucose). Utilizing a combination of chemical, electrochemical, and genomic tools, I found that increased FAN led to higher CE and lower methane (CH4) production by suppressing methanogens. Thus, managing FAN offers a practical means to suppress methanogenesis, instead of using expensive and unrealistic inhibitors. My research findings open up new opportunities for more efficient operation of MXCs; this will enhance MXC scale-up and commercial applications, particularly for energy-positive treatment of waste streams containing recalcitrant organics.
First, I found that fermentation, not anode respiration, was the rate-limiting step for achieving complete organics removal, along with high current densities and CE. The best performance was achieved by doing most of the fermentation in an independent reactor that preceded the MXC. I also outlined how the efficiency of fermentation inside MXCs can be enhanced in order to make MXCs-based technologies cost-competitive with other anaerobic environmental biotechnologies. I revealed that the carbohydrate and protein contents and the BOD5/COD ratio governed the efficiency of organic-matter fermentation: high protein content and low BOD5/COD ratio were the main causes for low fermentation efficiency.
Next, I showed how a high ammonium concentration can provide kinetic and metabolic advantages or disadvantages for anode-respiring bacteria (ARB) over their competitors, particularly methanogens. When exposed to a relatively high ammonium concentration (i.e., > 2.2 g total ammonia-nitrogen (TAN)/L), the ARB were forced to divert a greater electron flow toward current generation and, consequently, had lower net biomass yield. However, the ARB were relatively more resistant to high free ammonia-nitrogen (FAN) concentrations, up to 200 mg FAN/L. I used FAN to manage ecological interactions among ARB and non-ARB in an MXC fed with fermentable substrate (glucose). Utilizing a combination of chemical, electrochemical, and genomic tools, I found that increased FAN led to higher CE and lower methane (CH4) production by suppressing methanogens. Thus, managing FAN offers a practical means to suppress methanogenesis, instead of using expensive and unrealistic inhibitors. My research findings open up new opportunities for more efficient operation of MXCs; this will enhance MXC scale-up and commercial applications, particularly for energy-positive treatment of waste streams containing recalcitrant organics.
ContributorsMohamed, Mohamed Mahmoud Ali (Author) / Rittmann, Bruce E. (Thesis advisor) / Torres, Cesar I. (Thesis advisor) / Westerhoff, Paul (Committee member) / Parameswaran, Prathap (Committee member) / Arizona State University (Publisher)
Created2016
Description
Eighty-two percent of the United States population reside in urban areas. The centralized treatment of the municipal wastewater produced by this population is a huge energy expenditure, up to three percent of the entire energy budget of the country. A portion of this energy is able to be recovered through the process of anaerobic sludge digestion. Typically, this technology converts the solids separated and generated during the wastewater treatment process into methane, a combustible gas that may be burned to generate electricity. Designing and optimizing anaerobic digestion systems requires the measurement of degradation rates for waste-specific kinetic parameters. In this work, I discuss the ways these kinetic parameters are typically measured. I recommend and demonstrate improvements to these commonly used measuring techniques. I provide experimental results of batch kinetic experiments exploring the effect of sludge pretreatment, a process designed to facilitate rapid breakdown of recalcitrant solids, on energy recovery rates. I explore the use of microbial electrochemical cells, an alternative energy recovery technology able to produce electricity directly from sludge digestion, as precise reporters of degradation kinetics. Finally, I examine a fundamental kinetic limitation of microbial electrochemical cells, acidification of the anode respiring biofilm, to improve their performance as kinetic sensors or energy recovery technologies.
ContributorsHart, Steven Gregg (Author) / Torres, César I (Thesis advisor) / Parameswaran, Prathap (Committee member) / Rittmann, Bruce E. (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Arizona State University (Publisher)
Created2020
Description
Microalgae-derived lipids are good sources of biofuel, but extracting them involves high cost, energy
expenditure, and environmental risk. Surfactant treatment to disrupt Scenedesmus biomass was evaluated
as a means to make solvent extraction more efficient. Surfactant treatment increased the recovery of fatty
acid methyl ester (FAME) by as much as 16-fold vs. untreated biomass using isopropanol extraction, and
nearly 100% FAME recovery was possible without any Folch solvent, which is toxic and expensive. Surfactant
treatment caused cell disruption and morphological changes to the cell membrane, as documented by
transmission electron microscopy and flow cytometry. Surfactant treatment made it possible to extract wet
biomass at room temperature, which avoids the expense and energy cost associated with heating
and drying of biomass during the extraction process. The best FAME recovery was obtained from highlipid
biomass treated with Myristyltrimethylammonium bromide (MTAB)- and 3-(decyldimethylammonio)-
propanesulfonate inner salt (3_DAPS)-surfactants using a mixed solvent (hexane : isopropanol = 1 : 1, v/v)
vortexed for just 1 min; this was as much as 160-fold higher than untreated biomass. The critical micelle
concentration of the surfactants played a major role in dictating extraction performance, but the growth
stage of the biomass had an even larger impact on how well the surfactants disrupted the cells and
improved lipid extraction. Surfactant treatment had minimal impact on extracted-FAME profiles and,
consequently, fuel-feedstock quality. This work shows that surfactant treatment is a promising strategy for
more efficient, sustainable, and economical extraction of fuel feedstock from microalgae.
expenditure, and environmental risk. Surfactant treatment to disrupt Scenedesmus biomass was evaluated
as a means to make solvent extraction more efficient. Surfactant treatment increased the recovery of fatty
acid methyl ester (FAME) by as much as 16-fold vs. untreated biomass using isopropanol extraction, and
nearly 100% FAME recovery was possible without any Folch solvent, which is toxic and expensive. Surfactant
treatment caused cell disruption and morphological changes to the cell membrane, as documented by
transmission electron microscopy and flow cytometry. Surfactant treatment made it possible to extract wet
biomass at room temperature, which avoids the expense and energy cost associated with heating
and drying of biomass during the extraction process. The best FAME recovery was obtained from highlipid
biomass treated with Myristyltrimethylammonium bromide (MTAB)- and 3-(decyldimethylammonio)-
propanesulfonate inner salt (3_DAPS)-surfactants using a mixed solvent (hexane : isopropanol = 1 : 1, v/v)
vortexed for just 1 min; this was as much as 160-fold higher than untreated biomass. The critical micelle
concentration of the surfactants played a major role in dictating extraction performance, but the growth
stage of the biomass had an even larger impact on how well the surfactants disrupted the cells and
improved lipid extraction. Surfactant treatment had minimal impact on extracted-FAME profiles and,
consequently, fuel-feedstock quality. This work shows that surfactant treatment is a promising strategy for
more efficient, sustainable, and economical extraction of fuel feedstock from microalgae.
ContributorsLai, Yenjung Sean (Author) / De Francesco, Federica (Author) / Aguinaga, Alyssa (Author) / Parameswaran, Prathap (Author) / Rittmann, Bruce (Author) / Biodesign Institute (Contributor) / Swette Center for Environmental Biotechnology (Contributor)
Created2015-10-20
Description
Using a CH[subscript 4]-based membrane biofilm reactor (MBfR), we studied perchlorate (ClO[subscript 4]–) reduction by a biofilm performing anaerobic methane oxidation coupled to denitrification (ANMO-D). We focused on the effects of nitrate (NO[subscript 3]–) and nitrite (NO[subscript 2]–) surface loadings on ClO[subscript 4]– reduction and on the biofilm community’s mechanism for ClO[subscript 4]– reduction. The ANMO-D biofilm reduced up to 5 mg/L of ClO[subscript 4]– to a nondetectable level using CH[subscript 4] as the only electron donor and carbon source when CH[subscript 4] delivery was not limiting; NO[subscript 3]– was completely reduced as well when its surface loading was ≤0.32 g N/m[superscript 2]-d. When CH[subscript 4] delivery was limiting, NO[subscript 3]– inhibited ClO[subscript 4]– reduction by competing for the scarce electron donor. NO[subscript 2]– inhibited ClO[subscript 4]– reduction when its surface loading was ≥0.10 g N/m[superscript 2]-d, probably because of cellular toxicity. Although Archaea were present through all stages, Bacteria dominated the ClO[subscript 4]–-reducing ANMO-D biofilm, and gene copies of the particulate methane mono-oxygenase (pMMO) correlated to the increase of respiratory gene copies. These pieces of evidence support that ClO[subscript 4]– reduction by the MBfR biofilm involved chlorite (ClO[subscript 2]–) dismutation to generate the O[subscript 2] needed as a cosubstrate for the mono-oxygenation of CH[subscript 4].
ContributorsLuo, Yi-Hao (Author) / Chen, Ran (Author) / Wen, Li-Lian (Author) / Meng, Fan (Author) / Zhang, Yin (Author) / Lai, Chun-Yu (Author) / Rittmann, Bruce (Author) / Zhao, He-Ping (Author) / Zheng, Ping (Author) / Biodesign Institute (Contributor) / Swette Center for Environmental Biotechnology (Contributor)
Created2015-02-17
Description
UV photolysis was used to relieve inhibition of biomass growth by sulfadiazine (SD), a broad-spectrum anti-microbial. To investigate the effects of SD on biomass growth, three substrates—glucose alone (G), glucose plus sulfadiazine (G+SD), and glucose plus photolyzed SD (G+PSD)—were used to culture the bacteria acclimated to glucose. The biomass was strongly inhibited when SD was added into the glucose solution, but inhibition was relieved to a significant degree when the SD was treated with UV irradiation as a pretreatment. The biomass growth kinetics were described well by the Monod model when glucose was used as a substrate alone, but the kinetics followed a hybrid Aiba model for non-competitive inhibition when SD was added to the solution. When photolyzed SD was added to glucose solution to replace original SD, the growth still followed Aiba inhibition, but inhibition was significantly relieved: the maximum specific growth rate (μ[subscript max]) increased by 17 %, and the Aiba inhibition concentration increased by 60 %. Aniline, a major product of UV photolysis, supported the growth of the glucose-biodegrading bacteria. Thus, UV photolysis of SD significantly relieved inhibition by lowering the SD concentration and by generating a biodegradable product.
ContributorsPan, Shihui (Author) / Yan, Ning (Author) / Zhang, Yongming (Author) / Rittmann, Bruce (Author) / Biodesign Institute (Contributor) / Swette Center for Environmental Biotechnology (Contributor)
Created2015-05-01
Description
Sustainable production of microalgae for biofuel requires efficient phosphorus (P) utilization, which is a limited resource and vital for global food security. This research tracks the fate of P through biofuel production and investigates P recovery from the biomass using the cyanobacterium Synechocystis sp. PCC 6803. Our results show that Synechocystis contained 1.4% P dry weight. After crude lipids were extracted (e.g., for biofuel processing), 92% of the intracellular P remained in the residual biomass, indicating phospholipids comprised only a small percentage of cellular P. We estimate a majority of the P is primarily associated with nucleic acids. Advanced oxidation using hydrogen peroxide and microwave heating released 92% of the cellular P into orthophosphate. We then recovered the orthophosphate from the digestion matrix using two different types of anion exchange resins. One resin impregnated with iron nanoparticles adsorbed 98% of the influent P through 20 bed volumes, but only released 23% during regeneration. A strong-base anion exchange resin adsorbed 87% of the influent P through 20 bed volumes and released 50% of it upon regeneration. This recovered P subsequently supported growth of Synechocystis. This proof-of-concept recovery process reduced P demand of biofuel microalgae by 54%.
ContributorsGifford, McKay (Author) / Liu, Jianyong (Author) / Rittmann, Bruce (Author) / Vannela, Raveender (Author) / Westerhoff, Paul (Author) / Ira A. Fulton School of Engineering (Contributor) / School of Sustainable Engineering and the Built Environment (Contributor) / Biodesign Institute (Contributor) / Swette Center for Environmental Biotechnology (Contributor)
Created2015-03-01
Description
Inhibition by ammonium at concentrations above 1000 mgN/L is known to harm the methanogenesis phase of anaerobic digestion. We anaerobically digested swine waste and achieved steady state COD-removal efficiency of around 52% with no fatty-acid or H[subscript 2] accumulation. As the anaerobic microbial community adapted to the gradual increase of total ammonia-N (NH[subscript 3]-N) from 890 ± 295 to 2040 ± 30 mg/L, the Bacterial and Archaeal communities became less diverse. Phylotypes most closely related to hydrogenotrophic Methanoculleus (36.4%) and Methanobrevibacter (11.6%), along with acetoclastic Methanosaeta (29.3%), became the most abundant Archaeal sequences during acclimation. This was accompanied by a sharp increase in the relative abundances of phylotypes most closely related to acetogens and fatty-acid producers (Clostridium, Coprococcus, and Sphaerochaeta) and syntrophic fatty-acid Bacteria (Syntrophomonas, Clostridium, Clostridiaceae species, and Cloacamonaceae species) that have metabolic capabilities for butyrate and propionate fermentation, as well as for reverse acetogenesis. Our results provide evidence countering a prevailing theory that acetoclastic methanogens are selectively inhibited when the total ammonia-N concentration is greater than ~1000 mgN/L. Instead, acetoclastic and hydrogenotrophic methanogens coexisted in the presence of total ammonia-N of ~2000 mgN/L by establishing syntrophic relationships with fatty-acid fermenters, as well as homoacetogens able to carry out forward and reverse acetogenesis.
ContributorsEsquivel Elizondo, Sofia (Author) / Parameswaran, Prathap (Author) / Delgado, Anca (Author) / Maldonado, Juan (Author) / Rittmann, Bruce (Author) / Krajmalnik-Brown, Rosa (Author) / Biodesign Institute (Contributor) / Swette Center for Environmental Biotechnology (Contributor) / Ira A. Fulton School of Engineering (Contributor) / School of Sustainable Engineering and the Built Environment (Contributor)
Created2016-08-11
Description
Recent studies indicate the presence of nano-scale titanium dioxide (TiO[subscript 2]) as an additive in human foodstuffs, but a practical protocol to isolate and separate nano-fractions from soluble foodstuffs as a source of material remains elusive. As such, we developed a method for separating the nano and submicron fractions found in commercial-grade TiO[subscript 2] (E171) and E171 extracted from soluble foodstuffs and pharmaceutical products (e.g., chewing gum, pain reliever, and allergy medicine). Primary particle analysis of commercial-grade E171 indicated that 54% of particles were nano-sized (i.e., < 100 nm). Isolation and primary particle analysis of five consumer goods intended to be ingested revealed differences in the percent of nano-sized particles from 32%‒58%. Separation and enrichment of nano- and submicron-sized particles from commercial-grade E171 and E171 isolated from foodstuffs and pharmaceuticals was accomplished using rate-zonal centrifugation. Commercial-grade E171 was separated into nano- and submicron-enriched fractions consisting of a nano:submicron fraction of approximately 0.45:1 and 3.2:1, respectively. E171 extracted from gum had nano:submicron fractions of 1.4:1 and 0.19:1 for nano- and submicron-enriched, respectively. We show a difference in particle adhesion to the cell surface, which was found to be dependent on particle size and epithelial orientation. Finally, we provide evidence that E171 particles are not immediately cytotoxic to the Caco-2 human intestinal epithelium model. These data suggest that this separation method is appropriate for studies interested in isolating the nano-sized particle fraction taken directly from consumer products, in order to study separately the effects of nano and submicron particles.
ContributorsFaust, James (Author) / Doudrick, Kyle (Author) / Yang, Yu (Author) / Capco, David (Author) / Westerhoff, Paul (Author) / College of Liberal Arts and Sciences (Contributor) / Molecular and Cellular Biology (Contributor) / School of Life Sciences (Contributor) / Ira A. Fulton School of Engineering (Contributor) / School of Sustainable Engineering and the Built Environment (Contributor)
Created2016-10-31